Flex Cup

Can I just vent for a moment on how happy I am with almost figuring out this cup. I finally have it somewhat figured out where I’m comfortable and not having to check it every second. Tip: make sure the string is pushed far enough in that the opening of the cup does not look as though it’s sunken in. The pull string should go in as far as you can get it without pushing it through where the 🩸 is held. Then push one side of the cup into the other as if you are trying to make the cup collapse on itself. Then fold the cup tight like a burrito. Make sure the cup is still sunken in the middle though because that’s what’s going to help make the cup smaller to help with insertion. When you are inserting BE GENTLE no need to be rough. Hold it somewhat in the middle this way you can insert without losing it’s form and so that you have less space your fingers have to shimmy down. Remember Go slow. No need to rush. Be patient with yourself this stuff is NOT EASY the first few times. If you are having trouble take a break. It’s not in all the way if you feel pain, if you feel like it’s going to fall out or if you feel like you can push it out with a few kegels. Take one finger push along the side of the cup until you break the seal not at the base along the side be careful. Once the seal is broken if you didn’t remove it. Then push the cup with the other 3 fingers as far comfortably in as it will go. Try not to remove that finger on the seal/side until it is in place. Once it’s in place remove your finger and make sure it sealed by feeling along the bottom of the cup and near the sides you may have to rotate the cup while in to help get a seal. The string hanging out from my understandings is normal some cut it off if it’s bothersome. Not me though.

I am by no means a doc, but i am hoping this helps for those of you trying the cups like i am and have/had continuous issues.